Overlock Motorola Backflip 2.1 Eclair

Overlock your Motorola Backflip 2.1 Eclair
Overlock your Motorola Backflip to get the most performance out of it. Stock maximum speed of Backflip’s CPU is 528 MHz after over clock you will get 748 MHz!
Note: Don’t try this patch with Froyo 2.2.1 for Backflip
Requirements:
1.       Download the over clocked kernel for your Motorola Backflip here signed-bf.MT.kernel.2.13.11.zip.
Steps to Flash the Motorola Backflip Over clock Kernel:
1.       Copy the zip file downloaded in Req. 1 to the SD Card of your phone as you did for the zip file in Eclair update process.
2.       Reboot the phone in recovery mode :
A)     Turn Off your Backflip.
B)      Press the camera button and while you hold it, press the power button.
C)      Fast boot screen appears, press volume down key, and Recovery Menu appears.
3.       Navigate to Update with Zip file, with the help of volume up and down button, Press home button to select it.
4.       Now select the copied zip file and push power to select and again to confirm.
5.       Flashing will start after completion Reboot the phone. And now enjoy your over clocked speedy Backflip.
Later:
Download ‘setcpu’ from market
Open setcpu -> press menu-> device selection->scroll down and select auto detect speeds
(Allow superuser access to this app)
Now set the maximum speed using slider to 691MHz(recommended)  and check sliding further if your phone remains stable. Select the minimum to 128MHz (will drain your battery less but slow down your phone)
Now you need to do some research on creating profiles to set up your phones performance for different battery percentage. Set minimum (128 MHz) when the screen is locked, so it consumes less battery power.
Remember more the speed, more is power consumption.

No comments:

Post a Comment